Quantronics Australia Blog | Information, News, Reviews from the Quantronics Team

The PSP 3000 and ‘unmoddable’ V3 PSP-2000 (TA-088 revision motherboard) can now be modified!

While we can now install and run custom firmware on these consoles.  The custom firmware (CFW) is not stored in the onboard flash, but rather in RAM.

This means the CFW will not overtake your console completely and permanently, each time you power cycle your PSP (remove battery or fully reboot), your console will revert to normal system firmware.

We will give you the software on your memory stick to reload the CFW, so there is nothing to worry about!  You can load the custom firmware whenever you like once we have set it up for you.

We have finally received 16GB MicroSDHC cards from Sandisk!  This is a MASSIVE advance in compact flash memory development – you can turn any SDHC compatible device into a multimedia heavyweight.

Just think, any SDHC compatible phone now has the same capacity as the biggest iPhone – full data backups now fit into your coin purse and it is all at an affordable price!

At just $135, get yours today!

16GB Sandisk MicroSD Card

We are proud to announce the D2ALL.  Engineered by the same people that brought you the M3 DS Simply, M3 DS Real and itouchds we now have a very affordable wii modchip!

It works on all Wii Versions known to date, has the same size and shape as the D2PRO (hence making it work on the V4C Wii-Clip) and it works a treat!

Get your hands on one today!

If you have purchased an XBOX 360 manufactured after APRIL 2008, you will have noticed you have a DVD ROM that simply cannot be modifed.  You should also find it is very difficult to read any data at all from the DRIVE.

The only solution right now is to connect a MAX232 or compatible interface to the drive and solder wires to create an interface from your PC to the drive.

Lite-On Solder Points

Once interfaced to your PC, you will need to use a MAX232 compatible device to extract the DVD Key.  Software used to do this can be DVDKEY, DVDKEY32, MAXIMUS TOOLBOX and a few others.

The rest of the process is also an arduous task and is not completed easily.  This includes putting the drive into MODE B, ejecting the tray exactly half-way, powering down the drive and connecting to it again, retrieving the DRIVE KEY (inquiry.bin) and then preparing it into a new firmware and flashing onto a NEW DRIVE.

DeViLs360 has created a great step-by-step guide on exactly how to do this which can be found here.

You can buy the Xecuter Connectivity Kit v3, Maximus 360-Xtractor and the target drive from us right now.

The global price has dropped considerably for MicroSD memory in the past week and we have passed the savings on to you!

All memory configurations are now considerably discounted and bundle packs for R4, EDGE, DSTT, Acekard 2 and M3 Real have now been adjusted.